qdesignoptimizer package

Quantum design optimizer package for automating the design of superconducting circuits.

Subpackages

• qdesignoptimizer.estimation package
  • Submodules
    • qdesignoptimizer.estimation.classical_model_decay_into_charge_line module
      • mode_decay_rate_into_transmissionline()
      • calculate_t1_limit_grounded_lumped_mode_decay_into_chargeline()
      • calculate_t1_limit_floating_lumped_mode_decay_into_chargeline()
• qdesignoptimizer.utils package
  • Submodules
    • qdesignoptimizer.utils.chip_generation module
      • ChipType
      • create_chip_base()
    • qdesignoptimizer.utils.names_design_variables module
      • add_design_variables_to_design()
      • design_var_length()
      • design_var_width()
      • design_var_gap()
      • design_var_coupl_length()
      • design_var_lj()
      • design_var_cj()
      • design_var_cl_pos_x()
      • design_var_cl_pos_y()
      • junction_setup()
    • qdesignoptimizer.utils.names_parameters module
      • CAPACITANCE
      • ITERATION
      • Mode
      • Parameter
      • DesignVariable
      • mode()
      • param()
      • param_nonlin()
      • param_capacitance()
      • get_mode_from_param()
      • get_modes_from_param_nonlin()
    • qdesignoptimizer.utils.names_qiskit_components module
      • QiskitComponentName
      • name_id()
      • name_mode()
      • name_mode_to_mode()
      • name_tee()
      • name_short()
      • name_lp()
      • name_charge_line()
      • name_flux_line()
      • name_lp_to_tee()
      • name_tee_to_tee()
      • name_lp_to_chargeline()
    • qdesignoptimizer.utils.optimization_targets module
      • get_opt_target_qubit_freq_via_lj()
      • get_opt_target_qubit_anharmonicity_via_capacitance_width()
      • get_opt_target_res_freq_via_length()
      • get_opt_target_res_kappa_via_coupl_length()
      • get_opt_target_res_qub_chi_via_coupl_length()
      • get_opt_target_res_qub_chi_via_coupl_length_simple()
      • get_opt_targets_qb_res_transmission()
    • qdesignoptimizer.utils.plotting module
      • load_data_by_date()
      • plot_optimization_results()
    • qdesignoptimizer.utils.utils module
      • close_ansys()
      • get_junction_position()
      • get_middle_point()
      • get_normalized_vector()
      • rotate_point()
      • get_value_and_unit()
      • sum_expression()
      • get_save_path()

Submodules

• qdesignoptimizer.anmod_optimizer module
  • ANModOptimizer
    • ANModOptimizer.calculate_target_design_var()
    • ANModOptimizer.group_targets()
• qdesignoptimizer.design_analysis module
  • DesignAnalysis
    • DesignAnalysis.update_nbr_passes()
    • DesignAnalysis.update_nbr_passes_capacitance_ministudies()
    • DesignAnalysis.update_delta_f()
    • DesignAnalysis.update_var()
    • DesignAnalysis.get_fine_mesh_names()
    • DesignAnalysis.get_port_gap_names()
    • DesignAnalysis.run_eigenmodes()
    • DesignAnalysis.run_epr()
    • DesignAnalysis.get_simulated_modes_sorted()
    • DesignAnalysis.optimize_target()
    • DesignAnalysis.overwrite_parameters()
    • DesignAnalysis.get_cross_kerr_matrix()
    • DesignAnalysis.get_eigenmode_results()
    • DesignAnalysis.get_capacitance_matrix()
    • DesignAnalysis.screenshot()
    • DesignAnalysis.get_surface_p_ratio()
• qdesignoptimizer.design_analysis_types module
  • InterfaceProperties
    • InterfaceProperties.eps_r
    • InterfaceProperties.th
    • InterfaceProperties.tan_delta_surf
  • default_interface_properties()
  • Interfaces
    • Interfaces.substrate_air
    • Interfaces.metal_substrate
    • Interfaces.underside_air
    • Interfaces.metal_air
    • Interfaces.keys()
  • SurfaceProperties
    • SurfaceProperties.interfaces
    • SurfaceProperties.sheet_material
    • SurfaceProperties.sheet_thickness
  • MeshingMap
  • OptTarget
  • MiniStudy
  • DesignAnalysisState
• qdesignoptimizer.logger module
  • CustomHandler
    • CustomHandler.format()
  • dict_log_format()
• qdesignoptimizer.sim_capacitance_matrix module
  • CapacitanceMatrixStudy
    • CapacitanceMatrixStudy.capacitance_matrix_fF
    • CapacitanceMatrixStudy.mode_capacitances_matrix_fF
    • CapacitanceMatrixStudy.set_render_qiskit_metal()
    • CapacitanceMatrixStudy.simulate_capacitance_matrix()
  • ModeDecayStudy
    • ModeDecayStudy.get_decay_parameter_value()
    • ModeDecayStudy.get_decay_parameter_type()
  • ModeDecayIntoChargeLineStudy
    • ModeDecayIntoChargeLineStudy.get_t1_limit_due_to_decay_into_charge_line()
    • ModeDecayIntoChargeLineStudy.get_decay_parameter_value()
  • ResonatorDecayIntoWaveguideStudy
    • ResonatorDecayIntoWaveguideStudy.get_kappa_estimate()
    • ResonatorDecayIntoWaveguideStudy.get_decay_parameter_value()
• qdesignoptimizer.sim_plot_progress module
  • UnitEnum
    • UnitEnum.HZ
    • UnitEnum.KHZ
    • UnitEnum.MHZ
    • UnitEnum.GHZ
    • UnitEnum.FF
    • UnitEnum.S
    • UnitEnum.MS
    • UnitEnum.US
    • UnitEnum.NS
    • UnitEnum.ARB
  • OptPltSet
    • OptPltSet.x
    • OptPltSet.y
    • OptPltSet.x_label
    • OptPltSet.y_label
    • OptPltSet.x_scale
    • OptPltSet.y_scale
    • OptPltSet.unit
    • OptPltSet.normalization
    • OptPltSet.get_x_label()
    • OptPltSet.get_y_label()
  • DataExtractor
    • DataExtractor.get_parameter_value()
    • DataExtractor.get_design_var_name_for_param()
    • DataExtractor.get_design_var_for_param()
    • DataExtractor.extract_xy_data()
    • DataExtractor.get_y_data_with_statistics()
  • OptimizationPlotter
    • OptimizationPlotter.plot_standard()
    • OptimizationPlotter.plot_params_vs_design_vars()
    • OptimizationPlotter.plot_design_vars_vs_iteration()
  • plot_progress()